Custom Center
Custom Center – S. Carolina
- CNC Turning
- Cylindrical Grinding
- Cylindrical Grinder
-
1” Dia x 4 1/8” Long
- +/-.0002″
Capabilities Applied/Processes
Primary operation consisted of CNC turning.
Parts were turned oversize then Heat Treated to RC 58-62. Cylindrical Grinder was used for the grinding process. The Shank is a #2 Morse Taper and the Center is at 60 degrees.
Tolerance is (.0002) Runout between Shank and Center.
Delivery/Turnaround Time
Quantity was 4 pieces with delivery of 4 weeks.
Material Used | A2 Steel RC 58-62 |
Volume | 4 |
Turnaround Time | 4 Weeks |
If you are interested in learning more about this project and the processes we used to produce it, contact us today.
Industry News
No post found